How do I change the combination on a 4 digit Master Lock?

Asked By: Deivi Bundkirchen | Last Updated: 17th June, 2020
Category: automotive motorcycles
3.9/5 (3,904 Views . 42 Votes)
This lock is preset at the factory to operate at 0-0-0-0.
  1. With dials at 0-0-0-0, pull out the shackle.
  2. Turn shackle counterclockwise 90 degree (1/4 turn)
  3. Continue pressing shackle down and turn another 90 degree (1/4 turn)
  4. Set the dials to your own combination.

Click to see full answer

Herein, how do you change the combination on a 4 digit lock?

HOW TO SET THE FOUR-DIGIT LOck. Turn the number dials until the side of the lock shows “0000" down the center of the red line on the face of the lock. Turn the shackle 180° so that the metal tab lines up with the groove facing the opposite side of the lock. Push the shackle down.

Furthermore, how do you reset a master lock when its locked? Steps

  1. Open the lock using the old combination.
  2. Insert the reset tool into the shackle hole.
  3. Turn the reset tool so that the Master logo is facing you.
  4. Rotate the dial clockwise 3 times to clear the old combination.
  5. Enter your new combination.
  6. Remove the reset tool to lock it.
  7. Write down the combination in a safe place.

In this manner, how do you reset a 4 digit combination lock if you forgot the code?

If you forgot a bike lock combination or the digits to a padlock with a dial, you can try to reset it. Pull on the shackle until you see the wheels turn. When the wheel sticks or catches, move to the next wheel and continue through all the wheels.

Is there a way to reset a combination lock?

Take these steps to reset your lock:

  1. Pull up the shackle to open the lock.
  2. Rotate the shackle 90° counterclockwise and press all the way down.
  3. Hold down the shackle and set your own combination by turning dials.
  4. Turn the shackle back as normal. The setting is now complete.

14 Related Question Answers Found

How do you pick a Master combination lock?

Standard Instructions for Opening a Combination Lock
  1. Turn right three times. Stop at First Digit.
  2. Turn left one full turn passing 1st number and stop at Second Digit.
  3. Turn right and stop at Third Digit. Pull shackle. Profit.

How do you open a 4 digit combination lock?

How to Open a Four Number Combination Lock
  1. Find your combination.
  2. Go to the first number.
  3. Set the second dial on the lock to the second number in the combination.
  4. Use the third wheel to find the third number in the combination.
  5. Locate the fourth number in the combination on the bottom wheel on the lock and center it.

How do I set number lock?

How to Set a Combination Lock
  1. Pull up the shackle to unlock.
  2. Rotate the shackle 90 degrees counterclockwise and press down.
  3. Hold down and continue to turn the counterclockwise another 90 degrees.
  4. Set your own combination by turning the dials.
  5. Turn the shackle back as normal then the setting is complete.

How do you reset a Puroma combination lock?

How to set combination code:
  1. Hold the combination lock in which way numbers show on the right. Make sure the code is set to default(0-0-0-0).
  2. Push the shackle down until the tiny pin is fully inside the gap.
  3. Rotate back the shackle the same way until it pops up.